Page 92 - Products Catalogue 2019_Pedestrian EN 01-2019

OPERATION OPTIONS

The gate is activated by an impulse from an access control 1. Obstacle height: 900 or 1200mm from the ground
system such as a push-button, a motion detector or a card 2. Support post for integration of customer peripheral
reader installed on a support post, or from a remote program
selector located in the reception area. equipment
3. Support post with push-button (for free entrance or exit)
After passage authorisation, the gate opens automatically (in the 4. Support post with motion detector
user’s direction) or by means of a light push, depending on the 5. Monitoring panel
selected mode. The opening angle is adjustable. The obstacle 6. Personalised logo sticker (sanded)
remains open and closes automatically after a pre-set time. 7. Master/Slave configuration

The opening and closing speeds can be adjusted to meet local Note: for restrictions regarding the options, refer to the unit type.
requirements.
WORK TO BE CARRIED OUT
If the gate is obstructed while rotating it will stop immediately BY THE CUSTOMER
and make successive attempts to complete the cycle.
77Floor mounting
If the last attempt is still unsuccessful the timeout between 77Power supply
two attempts will be increased to prevent overheating and the 77Wiring between lanes of a single group
system will be restarted as soon as possible. 77Wiring to external peripheral equipment (if any)
77Integration of accessories
A fire detection command enables immediate opening of the
gate (selectable direction of opening). Note: Please follow the installation plan.

In case of a power failure the gate unlocks and can be opened STANDARD DIMENSIONS (MM)
by a light push.

STANDARD TECHNICAL
CHARACTERISTICS

Power supply Single phase 110 VAC (1A)-240 VAC (0.5A) 1000 1000
(+/- 10%) - 50/60Hz + ground.
Power consumption Note: not to be connected to a floating 20 160
Peak current network or to a high impedance earthed
Leakage current industrial distribution network. 1000
Motor 1050
Free passage [L] 15w during operation (< 10w at rest)
Min. opening/ Ø220
closing time <1A
10
Operating temperature < 3,5 mA
Relative humidity
MCBF 24 VDC - output power 30w

Sound level 1050mm
Weight
Protection rating 4 seconds
(depending on the access control system
reactivity and the user speed)

-10° to +50°C

< 95%, without condensation

1,000,000 mean cycles between failures, in
compliance with recommended maintenance

55 dB at 1m

55kg (without obstacle)

IP44

Complies with European standards

With a constant view to adopting the latest technological developments, Automatic Systems reserves the right to amend the above information at any time.

Products Catalogue | Pedestrian | 92