Page 113 - Vehicle Products Catalogue EN 012019

Arm Lighting

ARM LIGHTING FOR ALL BARRIERS (EXCEPT BL45)

TECHNICAL CHARACTERISTICS
OF A MODULE

The lighting on the arm consists of several red LED modules Dimensions 139 x 42 x 17mm
fitted on either side of the arm so that they can be seen by the Illuminated surface 100 x 37mm
traffic on both sides. Wave Length 625mm
Power supply 24 VDC, via the barrier control
The number of modules depends on the length of the arm (see unit
the price list). Consumption 80mA
Working temperature -25 to +80°C
Each module consists of 24 high luminescence LED oval lights Length of life Continuous operations
embedded in black UV-resistant resin. guaranteed for 2 years
IP 66
Electrical power is supplied from within the arm and its Weight 86g
movement shaft so that no wiring is visible.
Note : Adding options to the arm increases the weight.
The operating system for the modules can be adjusted by In order to guarantee an equivalent lifting drive the range of an arm fitted with
means of the barrier control unit: it can be set as continuous, options is limited. See the Usage Limits Rate table.
flashing, permanent or off when the barrier is open.

ARM LIGHT FOR BL45

DESCRIPTION

Arm lighting for BL 45 White, high brightness
LEDs Orange polycarbonate
LENS From 10 to 30 VDC
Power supply 4.2w
Consumption Optic diameter of 185mm
Emission area 630g
Weight IP54
Protection Index According EN50293 norm
EMC Fast insertion terminal
Connection (2 points), back fixating
From -20°C to +70°C
Working temperature

Note : Adding options to the arm increases the weight.
In order to guarantee an equivalent lifting drive the range of an arm fitted with
options is limited. See the Usage Limits Rate table.

With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time.

113 | Products Catalogue | Vehicle