Page 73 - Products Catalogue 2019_Pedestrian EN 01-2019

SmartLane 902

Designed for heavy use in intra-building sites, the SmartLane 902 security entrance lane ensures an effective, reliable
anti-fraud and rapid control of pedestrians taller than 1m, with or without luggage, in both directions of passage.
With its mechanical design and its embedded electronics, the equipment guarantees high levels of safety (prevention
of fraud) and safety (protection of the users during operation). The gate can be installed in series, in which case it is
necessary to define left-hand, right-hand and intermediate gates (with a mobile leaf on both sides of the gate).

4 12 10 DESCRIPTION
3 11
9 1. Self-supporting frame (made from galvanized steel)
SmartLane SmartLane integrating the electro-mechanical drive assembly for each
902 902 SmartLane mobile leaf, the photoelectric cells for the detection of the
left 902 presence of users, and control boards
intermediate right
2. Brushed AISI 304L stainless steel housing
3. Brushed AISI 304L stainless steel side panels with key lock,

allowing easy access to the electro-mechanical unit and the
control boards
4. Monolithic clear 12mm thick tempered glass leaf, retracting
completely into the body on opening movement
5. Black laminate top cover (stainless steel around the fixed
glass if any: i.e. for mobile leaf height > 1000mm)
6. Electro-mechanical unit consisting of:
77A three-phase asynchronous reduction motor
77Secondary transmission with crank-and-rod linkage

ensuring perfect mechanical locking in both extreme
positions
77A device for automatic opening of the mobile leaves in the
event of a power failure
77A variable-speed controller ensuring progressive
accelerations and gradual decelerations, for a movement
without vibration and for protection of the mechanism and
the users in the event of contact with the mobile leaves
77An inductive sensor controlling the position of the mobile
leaf
7. Dual AS1300 control board ensuring the management of the
gate, as well as for supporting various control options and/
or accessories. A LCD allows navigation in the drop-down
menus and the modification of certain parameters
8. Transfer of information through potential-free contacts:
passage authorization, passage information, defect, state of
the gate (free, prohibited, alarm)
9. Orientation pictogram, indicating the state of the gate to the
user (in service or out of service)
10. Photoelectric cells for detecting presence, ensuring the
control of the movement of the users through the gate as
well as their safety during the movements of the mobile
leaves
11. Extensions, allowing to increase the level of safety by
increasing the number of detection cells and to integrate an
optional access control system (badge reader or other)
12. Fixed glass preventing climbing over the gate

With a constant view to adopting the latest technological developments, Automatic Systems reserves the right to amend the above information at any time.

73 | Products Catalogue | Pedestrian