Page 81 - Products Catalogue 2019_Pedestrian EN 01-2019

SmartLane 910 Twin

Designed for heavy use in intra-building sites, the SmartLane 910 Twin automatic gate ensures a dissuasive control
of pedestrians taller than 1m, with or without luggage, in each direction of passage. The SmartLane 910 Twin makes it
possible to control 2 corridors independently. The SmartLane 910 Twin is installed between 2 walls, partitions or railings
on which the reflectors are fitted that are needed for the operation of the detection cells. With its mechanical design
and embedded electronics, the equipment guarantees an average level of security (prevention of fraud) and a high
level of safety (protection of users during operation).

45 4 DESCRIPTION
9
10 1. Self-supporting frame (made from galvanized steel)
3 SmartLane integrating the electro-mechanical drive assembly for each
900 mobile leaf, the photoelectric cells for the detection of the
SmartLane SmartLane SmartLane right presence of users, and the control boards
910 910 910
left 2. Brushed AISI 304L stainless steel housing
intermediate intermediate 3. Brushed AISI 304L stainless steel side panels with key lock,
hybrid
allowing easy access to the electro-mechanical unit and the
control boards
4. Monolithic clear 12mm thick tempered glass leaf, retracting
completely into the body on opening
5. Black laminate top cover (stainless steel around the fixed
glass if any: i.e. for mobile leaf height > 1000mm)
6. Electro-mechanical unit consisting of:
77A three-phase asynchronous reduction motor
77Secondary transmission with crank-and-rod linkage

ensuring perfect mechanical locking in both extreme
positions
77A device for automatic opening of the mobile leaves in the
event of a power failure
77A variable-speed controller ensuring progressive
accelerations and gradual decelerations, for a movement
without vibration and for protection of the mechanism and
the users in the event of contact with the mobile leaves
77An inductive sensor controlling the position of the mobile
leaf
7. Dual AS1300 control board ensuring the management of the
gate, as well as for supporting various control options and/
or accessories. A LCD allows navigation in the drop-down
menus and the modification of certain parameters
8. Transfer of information through potential-free contacts:
passage authorization, passage information, defect, state of
the gate (free, prohibited, alarm)
9. Orientation pictogram, indicating the state of the gate to the
user (in service or out of service)
10. Photoelectric cells for detecting presence, ensuring the
control of the movement of the users through the gate as
well as their safety during the movements of the mobile
leaves

With a constant view to adopting the latest technological developments, Automatic Systems reserves the right to amend the above information at any time.

81 | Products Catalogue | Pedestrian