Page 83 - Products Catalogue 2019_Pedestrian EN 01-2019

SmartLane 911 Twin

Designed for the heavy use in intra-buildings, the SmartLane 911Twin security entrance lane ensures an effective,
reliable anti-fraud and rapid control of pedestrians taller than 1m, with or without luggage, in one direction of passage.
The SmartLane 911Twin makes it possible to control 2 corridors independently. The SmartLane 911Twin is installed
between 2 walls, partitions or railings on which the reflectors are fitted that are needed for the operation of the
detection cells. With its mechanical design and its embedded electronics, the equipment guarantees high levels of
safety (prevention of fraud) and safety (protection of the users during operation).

12 4 12 DESCRIPTION

1. Self-supporting frame (made from galvanized steel)

integrating the electro-mechanical drive assembly for each

mobile leaf, the photoelectric cells for the detection of the

presence of users, and the control boards

2. Brushed AISI 304L stainless steel housing

5 3. Brushed AISI 304L stainless steel side panels with key lock,

allowing easy access to the electro-mechanical unit and the

control boards

4. Monolithic clear 12mm thick tempered glass leaf, retracting

9 11 completely into the body on opening
5. Black laminate top cover (stainless steel around the fixed

glass if any: i.e. for mobile leaf height > 1000mm)

6. Electro-mechanical unit consisting of:

77A three-phase asynchronous reduction motor

77Secondary transmission with crank-and-rod linkage

ensuring perfect mechanical locking in both extreme

positions

10 77A device for automatic opening of the mobile leaves in the
9 event of a power failure

77A variable-speed controller ensuring progressive

accelerations and gradual decelerations, for a movement

without vibration and for protection of the mechanism and

the users in the event of contact with the mobile leaves

77An inductive sensor controlling the position of the mobile

leaf
3 7. Dual AS1300 control board ensuring the management of the

gate, as well as for supporting various control options and/

or accessories. A LCD allows navigation in the drop-down

menus and the modification of certain parameters

8. Transfer of information through potential-free contacts:

passage authorization, passage information, defect, state of

the gate (free, prohibited, alarm)

9. Orientation pictogram, indicating the state of the gate to the

user (in service or out of service)

10. Photoelectric cells for detecting presence, ensuring the

control of the movement of the users through the gate as

well as their safety during the movements of the mobile

leaves

11. Extension allowing to increase the level of safety by

increasing the number of detection cells and to integrate an

optional access control system (badge reader for example)

12. Fixed glass preventing climbing over the gate

With a constant view to adopting the latest technological developments, Automatic Systems reserves the right to amend the above information at any time.

83 | Products Catalogue | Pedestrian