Page 105 - Vehicle Products Catalogue EN 012019

Folding tip support40 B DESCRIPTION

1 1. Aluminium collar for attaching the tip support to the arm
2 2. Spring
3. Base foot consists of an aluminium tube
3 4. Polyamide stopper

4 SURFACE TREATMENTS

To be used in place of a standard tip support when the road must 77Anti-rust cataphoresis treatment
be completely free. The folding tip support is particularly suitable for 772-component epoxy primer
aligning 2 arms bolt to bolt. 772-component polyurethane top coat
Attached at the end of the barrier arm by means of a collar, the 77Standard shade: RAL 9010 white
folding tip support rises along with it, freeing up access during
opening. TO BE CARRIED OUT
A spring ensures that the tip support is held in extreme positions BY THE CUSTOMER
and prevents any swinging movements.
Height (B) of the tip support = height under the arm in the horizontal 77Tip support length setting
position - 40mm, to be adjusted on site. The tip support does not
rest on the ground so that it does not bounce up when the barrier
closes, thereby protecting the geared motor.
Note : Adding options to the arm increases the weight.
In order to guarantee an equivalent lifting drive, the range of an arm fitted
with options is limited.
See the Usage Limits Rate table.

With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time.

105 | Products Catalogue | Vehicle