Page 46 - Vehicle Products Catalogue EN 012019

BL 10

The manual raising barrier BL 10 is intended for low-use access control.

3
5

6
4
1

STANDARD RAL COLOURS DESCRIPTION OF THE STANDARD
EQUIPMENT
RAL 2000 (*) RAL 3020 RAL 7016 RAL 9010
Orange 1. Electro-galvanised 3mm-thick sheet steel frame folded and
Traffic red Anthracite grey Traffic white welded on to a 10mm-thick base

(*) Standard colour 2. Stainless steel nuts and bolts
All other colours must be specified when ordering 3. Barrier shaft supported by 2 permanently lubricated

selfaligning plummer blocks. Progressive stops enable the
barrier to be stopped in a horizontal or vertical position
4. Locking of the barrier in a vertical or horizontal position by
padlockable pin
5. Steel counterweights fixed on the operative shaft in order to
ensure that the barrier’s movements are balanced according
to its range, at both opening and closing
6. Round boom made of extruded aluminium alloy, 1 or 2
sections bushed according to the overall length:
77From 3 to 5m: 1 section with 80mm diameter
77From 5 to 8m: 2 sections with 60mm and 80mm diameter
Boom enamelled white with red reflective bands on both
sides
7. Fixing frame (No provided)

With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time.

Products Catalogue | Vehicle | 46