Page 51 - Vehicle Products Catalogue EN 012019

STANDARD TECHNICAL OPTIONS
SPECIFICATIONS
77Round folding arm (a) (b)
Electrical Power supply Single phase 230VAC, 50/60Hz + ground 77Flat folding arm (a) (b)
(not to be connected to a floating network or to 77Aluminium rigid folding skirt for round arm (a)
Nominal power high impedance earthed industrial distribution 77Arm swing-off device in case of vehicle impact (a)
consumption network) 77Rubber protection profile on arm (a)
Motor 77Analogue sensor for accurate boom movement management
Gearbox 335W (at maximum speed and without options)
(boom feedback). Recommended option for arms > 4.5m in
Type of arm Three-phase asynchronous 250W motor windy sites
77Double limit switches for information on BL status in the event
Minimum operation Life-lubricated worm-screw speed reduction of power failure
time unit. 77Standard tip support for round arm (a)
Operational 77Electro-magnetic tip support for round arm (a)
temperature Aluminium tube boom arm, with round section 77Folding tip support for round arm (a)
Free passage (L) diameter 84mm. 77Protection switches in case of door and cover opening
MCBF (mean cycles 77Push button(s) box
between failures) from 1 to 4 seconds according to the boom 77Programmable clock (weekly or yearly)
Net weight length and the options chosen. 77Key switch on housing
IP 77Command by radio transmitter/receiver
Noise emitted during between -20 and +50°C (without optional 77Inductive loops for cars or trucks detection
operation heating) 77Presence detector for inductive loops
77Photo electric cell (automatic opening, closing after passage, safety)
3m. 77Cell support post
77Cell fixed on housing
5,000,000 with normal maintenance. 77Ultrasonic detector under arm (Protective cover included)
77Electronic board for Input/Output extension (CAN)
83kg (excluding arm) 77Totaling counter (with or without reset)
77Boom lighting (Leds)
44 77Traffic lights (Leds) fixed on a post on housing
77Traffic lights (Leds)
<70db(A) (measured at 1m from the surface of 77Support post for traffic lights
the machinery and at a height of 1.60m above 77Electronic board for third-party traffic lights control
the ground; according to ISO3744. No hearing 77Acoustic alarm 100 dB ±5 (Fixed inside)
protection needed.) 77STOP traffic sign Ø 400mm on the boom arm (a)
77Flashing light on cover
Conforms to European standards. 77Non standard RAL colour
77Treatment for aggresive saline environment
STANDARD DIMENSIONS (MM) 77Raised base
77120 VAC, 60 Hz power supply (reduces performances)
Mobile part 77Heating resistance 80W, for operation down to -35°C
77Cooling fan for Variable Speed Controller
Driving part
(a) Certain options are mutually incompatible and/or reduce the arm’s range.
L 872 Consult the «Limit of use» table of the price list.
360 1052 (b) Folding arm (option)
B
A

1052 Driving part A B L
872 length (mm) (mm) (mm)
828 (mm)
1995 1840 2500
403 Round 1030 2195 2040 to
335 arm 2295 2140
1230 1972 1810 5000
400 2000 - 6000 (L) Flat arm 2072 1910
1330 2172 2010 2200
2272 2110 to
1000
3000
1100

1200

1300

With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time.

51 | Products Catalogue | Vehicle