Page 66 - Vehicle Products Catalogue EN 012019

STANDARD TECHNICAL OPTIONS
CHARACTERISTICS
1. Aluminium rigid folding skirt (a) (requires option 2)
Power supply Single phase 230 VAC, 50/60Hz + ground. 2. Left/right-hand side arm offset
(not to be connected to a floating network or to 3. Electro-magnetic tip support (a)
Nominal power high impedance earthed industrial distribution 4. Folding tip support (a)
consumption network) 5. Security lock for crank hole closing plate
Motor 350W 6. Push button(s) box
Gearbox 7. Key switch on housing
Thermostatic heater Induction, 3-phase 250W 8. Command by radio transmitter/receiver
Ambient operation Worm-screw, life-lubricated. 9. Inductive loops for cars or trucks detection
temperature 80W 10. Presence detector for inductive loops
Boom arm balancing From -35 to +50°C. 11. Photo electric cell (automatic opening, closing after
Useful length of boom
arm (L) By adjustable spring(s) passage, safety)
Position of boom arm From 6 to 14m 12. Cell support post
Operation time 13. Cell fixed on housing
Central 14. Electronic board for Input/Output extension (CAN)
Tolerated relative 8 to 12 sec. according to the boom’s range and 15. Totaling counter (without or with reset button)
humidity the installed options. 16. Boom lighting (LED)
Net weight (without 95%, without condensation. 17. Traffic lights (LED) fixed on a post on housing
boom arm) 18. Traffic lights (LED)
MCBF (Mean Cycles ± 340kg. 19. Support post for traffic lights
Between Failures) 20. Electronic board for third-party traffic lights control
Protection index When respecting recommended maintenance, 21. STOP traffic sign, Ø 400mm (a)
Limit switch sensor 1.500.000 cycles. 22. Non standard RAL colour
IP44 23. AISI 316L stainless steel housing
IP65 24. Raised base
EC norms compliant 25. 120 VAC, 60 Hz power supply (reduces performances)

SURFACE TREATMENT (a) Some options reduce the arm’s range. Consult the «Limit of use» table of
the price list.
77Internal mechanical items: electrozinc coating
77Complete housing: cationic electrode position coating + TRAFFIC MANAGMENT OPTIONS
(ON DEMAND) :
1 coat of 2-component epoxy anti-rust primer and 1 top coat
of 2-component polyurethane structured paint. 26. Rotating base
Standard colour: Orange, RAL 2000 27. Stainless steel mechanical parts
28. Treatment for aggressive saline environment
WORK TO BE SUPPLIED 29. IP55 enclosure on the housing
BY THE CUSTOMER
Note : for restrictions on the options, consult the rate table.
77Power supply
77Electrical wiring connection to the control instruments STANDARD DIMENSIONS (MM)
77Means of fixing to the ground, according to the nature of the
705
existing ground
600 549
Note: comply with the installation drawing.

MIN. 6m - MAX. 14m

1130 60 934
1190 994

60

350 450

With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time.

Products Catalogue | Vehicle | 66