Page 68 - Vehicle Products Catalogue EN 012019

STANDARD TECHNICAL OPTIONS
CHARACTERISTICS
1. Left/right-hand side arm offset
Power supply Single phase 230 VAC, 50/60Hz + ground. (not 2. Height adjustable tip support
to be connected to a floating network or to high 3. Electro-magnetic tip support (a)
Nominal power impedance earthed industrial distribution network) 4. Folding tip support (a)
consumption 350W 5. Bolt cover to protect arm from vandalism
Motor 6. Security lock for crank hole closing plate
Gearbox Induction, 3-phase 250W 7. Push button(s) box
Thermostatic heater Worm-screw, life-lubricated. 8. Key switch on housing
Ambient operation 80W 9. Command by radio transmitter/receiver
temperature From -35 to +50°C. 10. Inductive loops for cars or trucks detection
Boom arm balancing 11. Presence detector for inductive loops
Useful length of boom By adjustable spring(s) 12. Photo electric cell (automatic opening, closing after passage, safety)
arm (L) From 3 to 8m 13. Cell support post
Position of boom arm 14. Cell fixed on housing
Operation time Central 15. Electronic board for Input/Output extension (CAN)
8 to 12 sec. according to the boom’s range and 16. Totaling counter (without or with reset button)
Tolerated relative the installed options. 17. Boom lighting (LED)
humidity 95%, without condensation. 18. Traffic lights (LED) fixed on a post on housing
Net weight (without 19. Traffic lights (LED)
boom arm) ± 340kg 20. Support post for traffic lights
MCBF (Mean Cycles 21. Electronic board for third-party traffic lights control
Between Failures) When respecting recommended maintenance, 22. STOP traffic sign, Ø 400mm (a)
Protection index 1.500.000 cycles. 23. Non standard RAL colour
Limit switch sensor IP 44 24. AISI 316L stainless steel housing
IP 65 25. Raised base
EC norms compliant 26. 120 VAC, 60 Hz power supply (reduces performances)

SURFACE TREATMENT (a) Some options reduce the arm’s range. Consult the «Limit of use» table of
the price list.
77Internal mechanical items: electro-zinc coating
77Complete housing: cationic electrode position coating + TRAFFIC MANAGEMENT OPTIONS
(ON DEMAND):
1 coat of 2-component epoxy anti-rust primer and 1 top coat
of 2-component polyurethane structured paint. 27. Rotating base
Standard colour: Orange, RAL 2000 28. Stainless steel mechanical parts
29. Treatment for aggressive saline environment
WORK TO BE SUPPLIED 30. IP55 enclosure on the housing
BY THE CUSTOMER
Note : for restrictions on the options, consult the rate table.
77Power supply
77Electrical wiring connection to the control instruments STANDARD DIMENSIONS (MM)
77Means of fixing to the ground, according to the nature of the
609 790
existing ground == 550

Note: comply with the installation drawing.

MIN. 3000 MAX. 8000 mm

930
1120
1180

75 275 450 60

With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time.

Products Catalogue | Vehicle | 68