Page 91 - Vehicle Products Catalogue EN 012019

TollPlus 262

The TollPlus 262 barrier has been specifically designed to meet the requirements of the toll market. Its high-speed
performance, from 0.6 seconds in continuous operation, allows easy traffic management, even in peak periods (up to
50 vehicles per minute). The TollPlus 262 barrier is simple to install and because of its rugged (20,000 cycles/day) and
reliable design, it requires low maintenance. Its small size and access to the mechanism and equipment located on the
opposite highway allows you to perform maintenance operations safely. Modular up to 4 metres, the TollPlus 262 barrier
has a wide range of options and accessories.

STANDARD EQUIPMENT

1. Steel base, 5mm thickness, with anti-rust treatment, RAL
2000 polyester paint finishing and rubber sealing joint

2. Steel housing, 3mm thickness, with anti-rust treatment
and RAL 2000 polyester paint finishing

3. Aluminium steel cover with anti-rust treatment and RAL
2000 polyester paint finishing

4. Steel door (at side), 2mm thickness, with anti-rust
treatment and RAL 2000 polyester paint finishing

5. Aluminium oval boom, 80 x 54mm, white laquered (RAL
9010), with red reflective stripes and extremity cap. Boom
swing-off system with swing-off sensor

6. Main shaft directly driven by the gear motor eliminating all
complicated adjustments and risk of additional breakdown

7. Electro-mechanical assembly including:
77Three-phase reversible gear motor with brake lubricated
for life, ensures the perfect protection of the mechanism in
case of malicious forced lifting
77Auto-aligning bearing block lubricated for life
77Variable frequency drive ensuring progressive
accelerations, short circuit protection, grounding,
overcurrent and thermal protection of the gear motor
77Electronic torque limitation of the electro-mechanical
assembly allows an immediate stopping of the boom
during closing in case of an obstacle
77Balancing of the arm by means of compensating
springs, according to the weight of the boom
77Automatic opening of the boom in case of power failure
with spring anti-drop system

8. Programmed control logic board according customer
specifications with adjustable end of movement period.
Information provided:
77Boom up position
77Boom down position
77Boom swing-off status

Additional information on request

With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time.

91 | Products Catalogue | Vehicle