Page 55 - Vehicle Products Catalogue EN 012019

4 3 10

1
2
5
7
5 98

STANDARD EQUIPMENT 8. Configurable AS1320 or PLA1300 electronic control board
allowing for various control options and/or additional
1. Folded and welded sheet metal body, 3 to 8 mm thick. accessories. Terminal blocks for communication with an
2. Lateral and frontal doors with key lock, ensuring easy access external device to:
77Provide status of the arm position (open or closed);
to the mechanism. 77Provide status of the presence detectors;
3. Removable weatherproof top cover with key lock.
4. White painted central arm with red and white reflective strips. 9. Safety detection photocell (optional),
10. Cover for vandal-proof screws.
Arm built around a steel IPN beam. 11. Reinforced bracket in orange colour.
5. Two supports (struts) with single triangulation for installing 12. Mechanical locking of the arm (recommended option)

the beam. Made of white painted steel with red and white 77In raised or lowered position during operation
reflective strips.
6. Solid drive shaft for the arm, with 50 mm diameter, mounted IMPACT SIMULATION
on 2 lifetime lubricated bearings.
7. Electromechanical unit:
77Reversible three-phase asynchronous gear motor.
77Secondary transmission via gearwheel and sprocket wheel.
77Frequency inverter ensuring progressive accelerations and

controlled decelerations, for vibration-free movement and
enhanced protection of the mechanism.
77Electromagnet-controlled lock to maintain the open and
closed positions during operation and in case of power
failure.
77Electronic torque limiter allowing the arm to be stopped
immediately during closing in the event of an obstacle.
77Inductive limit switches.
77Balancing of the arm by 6 compression springs.

With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time.

55 | Products Catalogue | Vehicle