Page 59 - Vehicle Products Catalogue EN 012019

BL 40

Rapid industrial rising barrier for access control over vehicles at medium and wide access points: Industrial sites,
traffic management.

STANDARD RAL COLOURS DESCRIPTION

RAL 2000 (*) RAL 3020 RAL 7016 RAL 9010 1. Sheet metal body folded and welded, from 3 to 8mm thick
Orange 2. Lateral and frontal doors with peripheral sealing joint and
Traffic red Anthracite grey Traffic white
lock, ensuring easy access to the mechanism
(*) Standard colour 3. Removable top cover, with lock and key
All other colours must be specified when ordering 4. Left/Right round aluminium arm, lacquered white with red

Note : These RAL references are available for free. reflective strips, made up of 2 or 3 segments fitting into each
other of a diameter of 100 - 90 - 84mm if longer than 5m,
CONFIGURATIONS and guyed with galvanised steel cables if longer than 7m
5. Solid driving shaft for the arm, diameter 50mm, mounted
Road on 2 bearings lubricated for life. The axis exit centred on the
housing allows for the easy inversion of the barrier model
Door Door (arm to the left or to the right of the housing), which allows for
4 configurations also taking into account the position of the
doors (see illustration)
6. Electro-mechanical assembly:
77Reversible three-phase asynchronous gear motor, ensuring

protection of the mechanism in the event of forced lifting of
the arm due to fraudulent action
77Secondary transmission on gearwheel and sprocket wheel.
Maintaining the arm in its two extreme positions (open and
closed), as well as during the Stop command, is achieved
by means of an electro-magnetic brake
77Frequency inverter ensuring progressive accelerations and
cushioned decelerations, for movement without vibration,
direction inversion without jolts (reopening) and increased
protection of the mechanism
77Electronic limitation of the electro-mechanic assembly
torque allowing for the immediate stop of the arm during
closing in the event of an obstacle
77Inductive limit switches
77Balancing of the arm by means of one or more
compression springs, depending on the weight of the arm
7. Lever for manual lifting of the arm (except for the automatic
opening option)
8. Parameterisable electronic control board allowing for various
control options and/or additional accessories
9. Connecting terminal block on the control board, in order to
provide:
77Status of the arm position (open or closed)
77Status of the presence detectors
77Master-slave control of 2 barriers opposite each other
(movement of a barrier controlled by the other barrier)

Door
Door
Door
Door

Door Door Solution 3 Solution 4

Solution 1 Solution 2 (Standard)

With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time.

59 | Products Catalogue | Vehicle