Page 60 - Vehicle Products Catalogue EN 012019

STANDARD TECHNICAL OPTIONS
SPECIFICATIONS
1. Articulated round arm
Electrical power supply Single-phase 230 VAC - 50/60Hz + ground (do 2. Rigid aluminium skirt
not connect to an isolated ground network or a 3. Aluminium folding fence
high impedance earthed industrial network) 4. Automatic opening of the arm in case of power failure
5. Locking the arm in opened and/or closed position
Consumption 450W
The reaction in case of power cut (locked or not) must be
Motor Three-phased asynchronous 250W specified when ordering
6. Double limit switches for information on the arm status in the
Reversible ring and pinion speed reducer, service factor 1.2 event of power failure
7. Tip support: fixed height tip, adjustable tip, electro-magnetic tip,
Useful arm length (L) 3 to 8m, in increments of 0.5m anti-vandalism tip, anti-vandalism + electro-magnetic tip, folding
tip and electrically lockable tip
Operation not hampered by 120km/h winds 8. Support leg for fence and aluminium skirt (if no tip support)
9. Rotating base with breaker pin in case of impact and report of
Ambient operating Between -20 and +50°C (without optional housing position by dry contact
temperature heating) 10. Anti-vandalism belt, protection of the doors and hood
11. Hood and door intrusion information (by dry contact)
Tolerated relative 95% without condensation 12. Push-button box
humidity 13. Fireman emergency opening - anti-vandalism
14. Programmable clock (weekly or yearly)
Minimum opening/ 3.5 s (adjustable through the control board) 15. Lockable switch on housing
closing time 16. Radio transmitter/receiver
17. Detection loop
Net weight 220kg (without arm) 18. Presence detector for inductive loops
19. Photoelectric cell for opening, closing or automatically stopping
Weight of the arm 20 to 30kg, depending on length and without
options the barrier arm
20. Cell support post
MCBF (Mean Cycle In compliance with recommended 21. Fixating of the cell
Between Failure) maintenance: 3,000,000 cycles 22. Electronic board for input/output CAN
23. Totalling counter with reset button
IP 44 24. Leds on arm
25. Traffic lights (led) - alone or fixed on barrier
EC compliant 26. Support post for traffic lights
27. AS1049 card for third-party traffic signs
SURFACE TREATMENT 28. Acoustic alarm 100 dB (±5) - fixed inside
29. Aluminium traffic sign (Ø 300mm)
77Zinc-coated internal mechanical parts 30. LED flashing light on cover for arm movement signalisation
77Complete body (housing, base plate, cover and doors): zinc 31. Anti vandalism leds on hood
32. Non standard RAL colour
dusting + epoxy structured paint 33. Treatment for aggressive saline environment (recommended
Total thickness of the surface treatment exceeds 160 μm
when the barrier is installed within 10km of the coast and may
WORK TO BE SUPPLIED be subject to salt attack): sandblasting + Alu Zinc plating 80μm
BY THE CUSTOMER outside (40μm inside) + polyzinc 80μm + 80μm powder paint)
34. Raised base
77Adapted ground fastening 35. 120 VAC - 60Hz power supply
77Power supply 36. Thermostatic 250 or 500W heating for operation to -25 or -45°C
77Wiring towards eventual external peripherals
Note : for restrictions on the options, consult the rate table.
Note: comply with the installation drawing (CH6943-GB).
4000 - 8000 (L)
STANDARD DIMENSIONS (MM)

= 498 = 327 249
= 498 =
948
1224,5

L + 200 mm

With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time.

Products Catalogue | Vehicle | 60